Unique to Scalextric Car Restorations this Scalextric
decal kit contains:
The number roundels are printed on paper, just
like the originals and are 13mm (approx. 1/2 inch ) in diameter.
The number decals are supplied pre-cut so that they are ready
to fit to the car.
Instructions for water slide decals:
1. Cut out the decal using a craft knife or pair of scissors.
Cut carefully around the object if you do not want a white border.
2. Place the cut out decal into a bowl of water for 10-30 seconds.
You can feel with your fingers the decal slipping away from the
backing paper.
3. Place the decal onto your Scalextric car and slowly pull away
the backing paper.
4. Use a lint free cloth to carefully dab the surface of the
decal, this will help soak up excess water and smooth out any
air bubbles.
5. Leave the decals to dry for 24 hours or use a hairdryer if
you want to dry them quicker.
Instructions for the self adhesive
decals:
1. Ensure the location for the decal is clean, dry and grease
free.
2. Remove the decal from the backing paper.
3. Apply the decal with firm even pressure.
Note: the water slide decals must
be applied before the self adhesive decals