This Easyfit Scalextric Digital Plug will convert a Scalextric
Digital Plug Ready (DPR) car into full digital capability in just
a couple of minutes. No special tools or skills are required.
- Remove the blanking plate on the car chassis by undoing the
retaining screw and disconnect the braid-to-motor wiring plug.
- Connect the Easyfit Scalextric Digital Plug to the braid-to-motor
- Replace the retaining screw to secure the Easyfit Scalextric
Digital Plug to the chassis.
- The blanking plate should be kept in a safe place for future
If required the Easyfit Scalextric Digital Plug can be transferred
to another car.
For non DPR cars use either the C7005
chip for the single seater cars or the C7006
chip for the saloon cars.
for most of the latest Scalextric Formula 1 cars