Vintage Scalextric Minimodels Smoothflow transformer

The Minimodels Smoothflow power supply has a generous 2.5 Amp output

Scalextric Minimodels Ltd Smoothflow transformer power supply



Supplied for many early Scalextric, Minimodel and Hornby sets this Minimodels transformer supplies 12 Volts at a current rating of 2.5 Amps. An overcurrent protection device is fitted too.

Input: 240 Volt A.C.

Output: 12 Volt D.C. 2.5 Amps.

This Minimodels Smoothflow power supply has been fully tested including the overcurrent protection device and everything is in full working order. The terminal thumbscrews are present.

This particular example is fitted with a UK 13 Amp 3 Pin mains plug.


This Minimodels Smoothflow power supply has been functionally tested with no faults identified and is supplied as presented. Scalextric Car Restorations recommends this unit is inspected by a qualified Electrician before use. Scalextric Car Restorations accepts no liability for loss or damage caused by this unit.




If you are not sure if this Minimodels power supply is for your track then please contact us we can help you.
Index of track power and control products